Ace Industries(India) Private Limited
Ace Industries(India) Private Limited
Andheri East, Mumbai, Maharashtra
GST No. 27AAICA7458F1ZG
TrustSEAL Verified
Call 08048762002 78% Response Rate
SEND EMAIL

Process Equipment

Providing you the best range of tray dryer, air tray dryer, vacuum tray dryer, fluid bed dryer, colloid mill machine and sparkler filter press with effective & timely delivery.

Tray Dryer

Tray Dryer
  • Tray Dryer
Get Best Quote
Approx. Price: Rs 1.5 Lakh / UnitGet Latest Price

Product Details:

Automation GradeAutomatic
Capacity6, 12, 24, 48, 96 and 192 Trays
BrandACE
Voltage440 Volt
Tray Size16 x 32 x 11/4 Inch
Material GradeSS 304, 316
Frequency50 Hz
MaterialStainless Steel
PhaseThree Phase
Sheet Thickness2 mm
Motor Power0.5 to 2 HP

An Air Tray Dryer Is used for the best drying results in conventional process. It consists of a double-walled cabinet with one or two doors. The gap between two walls is filled with light resin-bounded fibreglass wool insulation material to avoid heat loss. The doors are provided with gaskets to avoid air leakages from the front side of the door. Stainless steel trays are placed inside the chamber. cGMP model dryers are designed to dry specific products.

Product Details:-
  • Capacity: Lab model to suit 10kg powder - 6, 12, 24, 48, 96 and 192 trays. Standard, GMP & cGMP models available with SS 304/SS, 316/MS internals and externals.
  • Construction: External: 2mm thick; internal: 2mm thick.
  • Surface Finish: External: polished to 180 grit man finish; internal: buffed to 220 grit mirror finish.
  • Inlet & Outlet: Pharmaceutical and industrial tray dryers have a 5-micron pre filter at the inlet and a manually adjustable damper at the exhaust.
  • Doors: Doors are provided at the front and/or rear side of the dryer. The door lips are lined with silicon rubber gaskets to prevent air leakages. Suitable locking arrangement is provided for the doors.
  • Air Circulation: This is done by specially designed re-circulation blowers inside the dryer. Blower capacity, static and design depend on the size / model of dryer.
  • Heating: Dryers are supplied with either steam / electric / thermic fluid / hot water heating system. Suitable heating coils / calorifiers are provided.
  • Temperature Control: This is done by an electronic digital temperature controller fitted to the control panel. The temperature control in the dryer is fully automatic.
  • Trays: These are available in SS 304/316. All trays are fully dry-pressed and have curved corners. Trays are buffed to a mirror finish. They are also available in aluminium / polypropylene / FRP / MS galvanised according to client requirements.
  • Trolley: A trolley is provided in the dryers to accommodate trays. Trolley tracks are used to load and unload the trays into the dryer.
  • Electronic Panel: An automatic control panel is fitted on the side of the dryer. It consists of starters, contactors, safety relays, circuit breakers, indicating lamps, push buttons, timers, controllers etc.

Backed by our efficient workforce, we are capable of manufacturing, supplying and exporting Air tray Dryer. Available in various models, these products are known for their longer service life, corrosion & abrasion resistant and easy maintenance. Our Air tray Dryer can also be customized as per the specifications laid down by the customers. We also check all the products on various parameters to ensure flawlessness.

Application area:
  • Chemical industry
  • Automobile industry
  • Pharmaceutical industry

Further Details :
  • The fan of the dryer is made of Mild Steel, AISI 304 / 316 and other material.
  • The internal side of fan and radiators is covered with mesh to give complete safety on operations.
  • The internal surface of the dryer is rounded, which result in least airflow resistance and low pressure.
  • The outer body of the product is provided with rounded edges.
  • The shafts are well balanced to provide optimum functional usage.
Price Range:-Rs.1,50,000 - Rs.20,00,000/-
Request
Callback
Yes! I am Interested

Air Tray Dryer

Air Tray Dryer
  • Air Tray Dryer
Get Best Quote
Approx. Price: Rs 3 Lakh / UnitGet Latest Price

Product Details:

BrandACE
MaterialSS
Automation GradeAutomatic
Voltage415 Volt
Capacity15/20/75/100 Liter
Heating MediaElectric
Number Of Tray6, 12, 24, 48, 96 and 192 Trays
Max Temperature50 - 180 deg c
Weight (Kg)1000 Kg
Warranty18 Months
Tray Size16 x 32 x 11/4 Inch

Air Tray Dryer offered are precision designed and developed range of tray dryers that are suitable for use in industry sectors like Dyestuff, Textile, Pharmaceutical, Chemical, Food, Automobiles and other industries. Coming with heating provision through electrical/steam/oil/ gas fired burners, these dryers are designed to deliver optimum process efficiency and also provide for minimum resistance to airflow present inside.

Features:
  • Internal surfaces of dryers made using well-rounded corners that offer maximum angle that in turn results in the least airflow resistance with less pressure drop across corners.
  • Outer body fabricated with rounded edges and smooth finish
  • Inside fan radiators covered with mesh to provide complete safety on operations
  • Shafts sealed using food grade sealing pads that prevent leakage of hot air from drying cabinet, thus saving energy of drying process
  • Fans developed using MS, AISI 304 / 316 and other metal choices
  • Shafts well balanced to provide for optimum functional usage
Request
Callback
Yes! I am Interested

Vacuum Tray Dryer

Vacuum Tray Dryer
  • Vacuum Tray Dryer
Get Best Quote
Approx. Price: Rs 1.5 Lakh / UnitGet Latest Price

Product Details:

Capacity12,24,48,96 Tray
Automation GradeAutomatic
Voltage415 Volt
Product TypeTray Dryer
Frequency50 Hz
Usage/ApplicationPharmaceutical Industries
BrandACE
MaterialSS
Thickness6 - 8 mm
Condenser1.1,2,3,5 (Sq.m)
Tray Size800 x 400 x 50 mm

A Vacuum Tray Dryer works under vacuum conditions on the conduction principle. Inside the dryer are several shelves having trays on which the products are placed. The top most shelf is a dummy shelf placed there to ensure proper heating and to prevent the dried powder from escaping into the solvent extraction system. The shelves are constructed hollow with baffles cum stiffeners placed in between shelves. Every shelf has an inlet and outlet nozzle and is connected to an inlet and outlet header through these nozzles.

A hot medium reaches the shelf through the inlet header and flows through the shelves in a uniformly zig-zag pattern ensuring faster heat transfer to the surface. This in tam heats up the trays on the shelves. The hot medium flows out from the shelf through the outlet header.

The inlet and outlet headers are designed in such a way that the now of the heating medium is equally distributed into each of the shelves. The dryer chamber is constructed from heavy-duty plates to prevent the plates from buckling during th vacuum operation. Additional limpet coils are provided in order to further stiffen the body and to pass on the hot medium. The chamber is provided with a heavy door and adequate locking arrangement. The dryer chamber is connected to a shell & tube by means of a vapour column to a Heat Exchanger. This in turn is connected to a condensate receiver.

Vacuum is applied to the condensate receiver. Vapour evolved during the drying process collects in the receiver after it is cooled in the heat exchanger. The vapour to be cooled is passed through the tube side of the Heat Exchanger, while cooling water is passed through the shell side. A cooling coil in the condensate receiver cools any vapours entering the receiver before it goes into the vacuum pump. The condensate receiver is connected to a vacuum trap to make sure that any uncooled vapours from the receiver get trapped thus minimising the vapour content entering the vacuum pump.

Features:
  • Main body and door constructed in SS 316
  • Coming with hollow shelves in SS 316
  • Trays available without back folding in SS 316
  • Shell tube with receiver in SS 304 to provide for solvent recovery
  • Features digital temperature indicator at Inlet and Outlet
  • Glass view interface provided on door and receiver
  • Flow glass provided for monitoring condensation between condenser and receiver
  • Comes with provision for nitrogen purging
  • Also features vacuum break valve in vacuum line
  • Available in construction finish as per cGMP standards
Price Range:-Rs.1,50,000 - Rs.15,00,000/-
Request
Callback
Yes! I am Interested

Fluid Bed Dryer

Fluid Bed Dryer
  • Fluid Bed Dryer
Get Best Quote
Approx. Price: Rs 1.5 Lakh / UnitGet Latest Price

Product Details:

BrandACE
Automation GradeAutomatic
Model Name/NumberAIM15
Usage/ApplicationPharmaceutical
Capacity5 - 8 Kg
Max Temperature50 - 80 Deg C
Power (Kw)9 KW
Voltage (V)415 Volt
Steam Consumption15 kg/hr
Body MaterialStainless Steel
Motor3 HP

Fluid Bed Dryer is designed for fast and uniform drying of powders, crystals and medium sized pellets. The Fluid Bed Dryer finds application in Pharmaceuticals, Bulk Drugs, Dyes & Chemicals, Phyto-Chemicals, Catalysts, Food Products & Starch derivatives, Pesticides etc.

Fresh air is drawn in by means of a fan. The air is then passed through a filter and heated to produce warm air by use of electric heaters. If the product contains a solvent or inflammable substances, the dryer must be operated using steam and provided with a flame-proof motor. The heated air passes through the product container which has diffuser plates and a sieve. Due to the stream of air, the wet product gets fluidised. The material gets surrounded by the hot air and gets dried due to heat transfer. Moist air passes through a filter bag and an exhaust duct. The Fluid Bed Dryer is not suitable for drying of liquids or pastes.

We are among the most trusted firms, engaged in manufacturing, supplying and exporting Fluid Bed Dryer Machine. Designed in compliance with international quality norms, these products are manufactured using quality components and material, procured from the reliable vendors of the market. We also have R&D experts who conduct regular researches to improvise our Fluid Bed Dryer Machine.

Features:
  • Sturdy construction
  • Low maintenance
  • Easy installation and low power consumption

Further Details:
  • Trolley system provided with the machine is SS-316 constructed
  • Supported by automation and PLC control
  • Provided with expansion chamber that feature the guide support
  • Lifting jack, which is housed in an inlet lower chamber, is made of Stainless Steel

Working Principle:
  • The dryer suck the atmospheric air via micron filter and balanced fan driver
  • Provide clean air passes over electric heaters/ steam
  • By the process of fluidization, the hot air passes through the product
  • The dryer is provided with dehumidifier support
  • The blower speed is controlled through an AC frequency drive that assists in controlling fluidization and avoids the choking of filter bag
  • To avoid lump formation in a container and achieve uniform fluidization, the ranking system is provided

ModelAIM-15AIM-30AIM-60AIM-120AIM-200AIM-250AIM-300AIM-500
Container Vol.(Ltrs.)181002003806508009801700
Batch Capcity in Kg5 to 830 to 4060 to 75120 to 150200 to 225250 to 280300 to 350500 to 550
Drying Temp. in C50-8050-8050-8050-8050-8050-8050-8050-80
Motor H.P.35101520253060
Heating load KW9183654Electrical heating not recommended
Approx. Steam Consumption kg/hr152550100160200250430

Price Range:-Rs.1,50,000 - Rs.12,00,000/-
Request
Callback
Yes! I am Interested

Colloid Mill Machine

Colloid Mill Machine
  • Colloid Mill Machine
Get Best Quote
Approx. Price: Rs 1.15 Lakh / UnitGet Latest Price

Product Details:

Capacity12 to 100 Kg/Hour
MaterialStainless Steel
Speed2850 rpm
Height1100 mm
BrandACE
Motor Power3 HP
Power SourceElectric
Voltage240 Volt
PhaseSingle Phase

We are among the most trusted firms, engaged in manufacturing, supplying and exporting Colloid Mill Machine. Designed to perfection, our machines are manufactured using quality material and components that are sourced from the reliable vendors of the market. These machines are provided to customers in various models and sizes at market leading prices. Also, we provide tailor-made solution for Colloid Mill Machine as per clients needs.


Features:
  • Longer functional life
  • Sturdy construction
  • Low maintenance
 
Our Colloid Mill Machines are broadly used in :
  • Chemical industry
  • Cosmetic and detergent industry
  • Food, flour, dairy, sweetmeats and confectionery industry
  • Meat packing industry
  • Paint industry
  • Paper industry
  • Pharmaceutical industry
  • Rubber industry
  • Sausage production
  • Starch industry
  • Textile industry
Request
Callback
Yes! I am Interested

Sparkler Filter Press

Sparkler Filter Press
  • Sparkler Filter Press
Get Best Quote
Approx. Price: Rs 1.15 Lakh / UnitGet Latest Price

Product Details:

BrandACE
Usage/ApplicationIndustrial
Automation GradeSemi-Automatic
No Of Plates15, 18, 24
Filter Area4.192, 5.035, 6625 m2
Body MaterialSS
Capacity144, 171, 225 Liter
Frequency50 Hz
Model Name/NumberAIM-24
Voltage240 Volt
Plate Diameter24"

We among the most trusted firms, indulge in manufacturing, supplying and exporting Sparkler Filter Press. Used in several industries like automobile, automotive and textile, these products are made using quality material and latest technology. Our Sparkler Filter Press is also thoroughly checked by expert quality controllers on various parameters to ensure flawlessness. We further conduct regular researches for improvising these products.
Working :The liquid is directed with the help of pumps through the centre channel of the cartridge from the bottom of the body. Suspended particles get retained on the fitter medium resting on the filter plates and the clear filtrate emerges from the side holes of the plates inside the tank and flows out from the bottom outlet. The filter tank does not come into contact with the liquids and hence remains clean. The cake filtrates and solids remain completely inside the fully closed filter plate cartridge. Complete recovery of the filtrate is possible by passing of air or an inert gas through the bottom inlet to dry the cakes and get a clean empty tank.

Further Details:
  • Available in variety of plate size options.
  • Comes with horizontal filter plate.
  • Deliver optimum filtrate quality.
  • Enclosed construction.
  • Has large cake holding capacity.

Salient Features:
  • Maintenance can be easily carried out just by lifting the dome i.e., without lifting the cartridge.
  • Quick and easy removal of filter plate cartridge for cleaning of cake.
  • Filtrate is obtained without scavenging agents.
  • Liquid does not remain between the tank or the cartridge.
  • Possibility of high working pressure.
  • Uniform distribution of cake and filtrate.
  • Enclosed construction.
  • Cake holding capacity.
  • High production rate.
Request
Callback
Yes! I am Interested

Nutsche Filter Vacuum And Pressure Operation

Nutsche Filter Vacuum And Pressure Operation
  • Nutsche Filter Vacuum And Pressure Operation
  • Nutsche Filter Vacuum And Pressure Operation
  • Nutsche Filter Vacuum And Pressure Operation
  • Nutsche Filter Vacuum And Pressure Operation
Get Best Quote
Approx. Price: Rs 1 Lakh / UnitGet Latest Price

Product Details:

Usage/ApplicationChemical Industry
BrandACE
Automation GradeSemi Automatic
Body MaterialSS
Filtration Capacity10 to 5000 Liter
FinishingMirror Finished
Frequency50 Hz
Voltage240 Volt
Flow Rate>4000 m^3/hr
Valve Size1.5 "
Vessel Diameter200-400 mm
Vessel Height500-800 mm

Nutsches are available in lab type through pilot plant and production scale, in volumes ranging from 10 to 5000 ltrs. Nutsches are operated through Vacuum and pressure.


Salient Features:
  • 316 Stainless Steel fabrication or other alloys including Hastelloy C-276/C-22 optionally available.
  • For aqueous regia production nutsche filter available with halar or tefzal coating.
  • All Nutsche filters are as per ASME standard codes for full vacuum and pressures High purity design, various pharmaceutical grade finishes including electro-polishing, mirror, matt and dull finish. Optional jacketing for heating / cooling or electric heaters.
  • Easy clamping of filter media
  • Optional coatings including Teflon.
  • Safety pressure relief valves or nitrogen purging nipple.
  • Valves for pressurization, vacuum, venting, slurry addition, draining etc.
  • Pressure / vacuum gauges optional.
  • Sight glasses and sampling ports.
  • Other instrumentation such as thermometers temperature transmitters, level, extra at actuals.
  • Wide variety of filter pore sizes and types, 1 micron to 200 micron pore sizes, stainless steel, Hastelloy, polypropylene, special membrane and other filter materials available.
  • Easy perforated plate arrangement.
  • Body flange model available for easy cleaning and change over material.
  • Castor wheels available for easy mobility.
 Price Range:-Rs.1,00,000 - Rs.4,50,000/-
Request
Callback
Yes! I am Interested

Mass Mixer

Mass Mixer
  • Mass Mixer
Get Best Quote
Approx. Price: Rs 1.5 Lakh / UnitGet Latest Price

Product Details:

CapacityUpto 10,000 Liter
MaterialSS
ShapeRectangle
PhaseThree Phase
Automation GradeSemi-Automatic
Speed2850 rpm
BrandACE
Frequency50 Hz
Usage/ApplicationIndustrial
Voltage380 Volt
Motor Power3 HP

Mass Mixer offered  provides for high efficiency working support and finds suitability for mixing of powder and grain state materials. The industry sectors where these mixers find use in include chemical, food, pharmacy and other industries.

Some of its features include complex movement of material in the container for uniform mixing, suitable for mixing of powder material, finding use in industry sector like dyeing auxiliaries, chemical, pesticide, pharmaceutical.


The Mixer consists of mixing drum complete in itself. It contains a mixing drum body, mixing paddle and sealing arrangement. The drum rests on rigid M.S. fabricated body carrying motor, gear box, starter and tilting arrangement. The drive of mixing paddle is through suitable oil filled worm gear unit which in turn gets drive through V belts from a suitable T.E.F.C. motor. The blades of the paddle are so arranged that thorough mixing is obtained. All parts which are in direct contact with the material to be mixed are of S.S. or neutral material. The main paddle runs in journals and supported by thrust bearings of ample size to carry rigid and thrust load. The whole drum of the mixer makes for ease of cleaning. The rotor is so designed that it can be removed by removing the main shaft without much problem.


Additional Features:
  • Plastic Dust Cover provided to see the process all the times.
  • Safety : If motor covers open it will trop off automatically.
  • Tilting Device is provided to ease the unloading of the material Specially designed self-adjusting sealing arrangement Provision is made for lubricating all moving parts
Price Range:-Rs.1,50,000 - Rs.9,00,000/-
Request
Callback
Yes! I am Interested

Ribbon Blender

Ribbon Blender
  • Ribbon Blender
Get Best Quote
Approx. Price: Rs 1 Lakh / UnitGet Latest Price

Product Details:

Usage/ApplicationIndustrial
ShapeRectangle
Power SourceElectric
Power (Kw)15 KW
PhaseThree Phase
Voltage415 Volt
Frequency50 Hz
MaterialSS, Carbon Steel and Alloy Steel
BrandACE
Capacity5 - 10,000 Liter

Ribbon Blender offered to comprise high-performance horizontal ribbon mixers that find extensive use in various industrial applications involving the production of powdery as well as viscosity/cohesive powders. Other than this, the blender also find support for processing of dry mortar, coating, thermal insulation materials among others.

Some of its features include system comprise U-vessel, ribbon blade, transmission parts; provide for even and uniform mixing support, provide optimum support for mixing of viscosity substances, bottom discharge support for achieving complete discharge.

Price Range:-Rs.1,00,000 - Rs.9,00,000/-
Request
Callback
Yes! I am Interested

Multi Mill

Multi Mill
  • Multi Mill
Get Best Quote
Approx. Price: Rs 1.15 Lakh / UnitGet Latest Price

Product Details:

Usage/ApplicationIndustrial
Automation GradeAutomatic
MaterialSS
Power SourceElectric
Rotor speed750 - 3000 rpm
Motor0.5, 1, 3, 5 HP
BrandACE

Salient Features:
  • Suitable for dry granulation / pulverizing / shredding and chopping of materials.
  • Easy mobility with the help of castor wheels.
  • Beaters: 8 to 12 nos with knife/impact edge and 2 scraper blades.
  • Drive - belt drive or VFD
  • Trolley mounted

Options
:
  • Flame proof motor with push button switch.
  • Direct drive (VFD control).
  • Single drive - mechanical seal
  • GMP model.
Request
Callback
Yes! I am Interested

Chemical Blender Machine

Chemical Blender Machine
  • Chemical Blender Machine
Get Best Quote
Approx. Price: Rs 75,000 / UnitGet Latest Price

Product Details:

Capacity15 to 5000 Liter
BrandACE
StyleDouble Ribbon
Automation GradeAutomatic
Finishing TypeMirror Finished
Motor Power (Horsepower)60 HP
Power (Kilowatt)0.75 - 50 KW
Electric Voltage (Volt)440 Volt
Frequency (Hz)50 Hz
Speed (RPM)15 rpm
Material GradeSS 304
Max. Loading (%)65%
Power SourceElectric

Chemical Blender Machine support and finds suitability for mixing of powder and grain state materials. The industry sectors where these blenders find use in include chemical, food, pharmacy and other industries.

Some of its features include complex movement of material in the container for uniform mixing, suitable for mixing of powder and liquid material, finding use in industry sector like dyeing auxiliaries, chemical, pesticide, pharmaceutical; agitators support in form of turbine type, propeller type, anchor type, impeller type.


Price Range:-Rs.75,000 - Rs.8,50,000/-
Request
Callback
Yes! I am Interested

Blending Machines

Blending Machines
  • Blending Machines
Get Best Quote
Approx. Price: Rs 75,000 / UnitGet Latest Price

Product Details:

MaterialSS
Automation GradeAutomatic
Model Name/NumberACE 7000
Usage/ApplicationIndustrial
BrandACE
Motor Power30 HP
Voltage220 Volt
Volume Capacity10000 Liter
Discharge Butterfly Valve16"
Gear Box12"
Dimension4430 x 2912 x 3438 mm

Blending Machines support and finds suitability for mixing of powder and grain state materials. The industry sectors where these blenders find use in include chemical, food, pharmacy and other industries.

Some of its features include complex movement of material in the container for uniform mixing, suitable for mixing of powder and liquid material, finding use in industry sector like dyeing auxiliaries, chemical, pesticide, pharmaceutical; agitators support in form of turbine type, propeller type, anchor type, impeller type and others.


Price Range:- Rs.75,000 - Rs.8,50,000/-
Request
Callback
Yes! I am Interested

Sparkler Filter

Sparkler Filter
  • Sparkler Filter
Get Best Quote
Approx. Price: Rs 1.15 Lakh / UnitGet Latest Price

Product Details:

Filter TypeReturn Line Filters
Usage/ApplicationChemical Industry
Body MaterialSS
Max Pressure (Mpa)3 Mpa
Capacity (Litre)500 Liter
ColorSilver
Size8 / 12/24/18/33
Surface FinishMirror Finish
BrandACE

Sparkler Filter offered to comprise the precision designed range of sparkler filter press that is based on the working principle of unfiltered liquid being fed into the filter through positive pressure where fed liquid travels through opening given on sides of Filter Plates. With the increase in liquid pressure, filter media works by holding foreign particles and only allows clear filtrate to pass through the central channel that is formed through interlocking pressure cups to the outlet.

Features:
  • Filtration process continues till cake holding a capacity of the unit is reached/till filtrate rate almost stops owing to cake resistance.
  • Enclosed construction that prevents evaporation, oxidation as well as leakage possibilities.
  • Available with different plate size options including the deep plate for providing the large percentage of cake holding capacity as well as the Shallow plate for the small percentage of cake holding capacity.
  • Comes with horizontal filter plate that prevents cake from dropping or cracking, thus providing for optimum filtrate quality
  • Filtration area, as well as cake holding capacity, can also be customized (increased/decreased) as per the process needs.
Request
Callback
Yes! I am Interested

Air Dryer

Air Dryer
  • Air Dryer
Get Best Quote
Approx. Price: Rs 3 Lakh / UnitGet Latest Price

Product Details:

Capacity10 to 600 m3/hr
Automation GradeAutomatic
Voltage380 Volt
Dryer TypeRegenerative Desiccant Dryer
Maximum Pressure232 bar
Motor Speed2800 rpm
Surface FinishPaint Coated
Driven TypeElectric
PhaseThree Phase
Power3 KW
BrandACE
ApplicationIndustrial
Body MaterialMild Steel

Request
Callback
Yes! I am Interested

Hydro Extractor

Hydro Extractor
  • Hydro Extractor
Get Best Quote
Approx. Price: Rs 1.5 Lakh / UnitGet Latest Price

Product Details:

Usage/ApplicationIndustrial
Automation GradeAutomatic
Model Name/NumberACE 40-5
BrandACE
Basket Diameter400 mm
Basket Mouth Diameter300 mm
Height of Basket Shell250 mm
Rated Charge in Basket15 Kg
Max Cake Capacity of Basket13 Ltr
Filter Area of Basket0.31 sq.mtr
Basket Speed1500 rpm
Acceleration a Basket Periphery503 "G" Unit
Power of Motor1 HP/ 0.75 KW
Machine Area0.8 x 1.0 MT
Machine Weight550 Kg

To fulfil the demands and requirements of our esteemed clients, we manufacture, supply and export Hydro Extractor. Designed as per industry guidelines, these products are thoroughly checked and tested by expert quality controllers on various parameters to ensure flawlessness. We also have a wide distribution network which supports us in delivering this Hydro Extractor at clients’ end within the stipulated time frame.

Features:
  • Longer working life
  • Excellent performance
  • Low maintenance and power consumption

Advantages Of Using The Hydro Extractor:
  • Has closed system for effluent
  • Even humidity distribution
  • Excellent rewinding properties
  • Low energy consumption
  • Low residual moisture
  • Low maintenance cost
  • Significant energy savings

MODEL NO. 'ACE' Unit 40-5 50-5 60-5 75-5 90-5 100-5 105-5 120-4 150-3 180-3
Basket Diameter MM 400 500 600 750 900 1000 1050 1200 1500 1800
Basket Mouth Diameter MM 300 370 425 550 650 700 750 850 1100 1200
Height of Basket Shell MM 250 250 325 325 450 450 450 450 500 600
Rated Charge in Basket KG 15 25 45 75 175 200 220 300 500 1000
Max.Cake Capacity of Basket LTR 13 22 44 64 136 175 190 256 384 847
Filter Area of Basket SQ.M. 0.31 0.39 0.62 0.77 1.29 1.41 1.48 1.71 2.38 3.39
Basket Speed RPM 1500 1350 1220 1100 1000 950 875 775 600 635
Acceleration a Basket Periphery G UNIT 503 509 499 507 503 500 449 403 302 403
Power of Motor HP 1 2 3 5 7.5 7.5 10 15 20 30
KW 0.75 1.5 2.2 3.7 5.5 5.5 7.5 11 15 22.5
Machine Area (Approx.) MT 0.8x1.0 1x1.2 1.2x1.5 1.5x1.7 1.7x1.9 1.9x2.2 2.0x2.2 2.2x2.5 2.5x2.8 3x3.5
Machine Weight (Approx.) KG 550 650 950 1150 1600 1700 1800 2200 3000 4000

Price Range:-Rs.1,50,000 - Rs.7,50,000/-
Request
Callback
Yes! I am Interested

Octagonal Blender

Octagonal Blender
  • Octagonal Blender
Get Best Quote
Approx. Price: Rs 3.15 Lakh / UnitGet Latest Price

Product Details:

Model Name/NumberACE 1050
Capacity1500 Liter
Automation GradeAutomatic
PhaseSingle Phase
Size2480 x 1643 x 2172 mm
Motor Power5 HP
ShapeOctagonal
Material GradeSS 304, 316, 316L
Frequency50 Hz
Usage/ApplicationIndustrial
BrandACE
MaterialStainless Steel
Voltage220 V
Discharge Butterfly Valve10"
Gear Box5"

Special Features Of Octagonal Blender:
  • The Octagonal Blender is suitable for dry mixing of products in granule form.
  • Easy for loading and unloading of material.
  • Easy for cleaning.
  • All contact parts of the Octagonal Blender are made out of SS 304 / SS 316 or SS 316 L quality material, as per customer's requirements.
  • The octagonal shape and slow speed of rotating gives sufficient continuous movement to the granules, resulting in good quality.
  • Simple design of Octagonal Blender requires minimum maintenance.
  • General structure and safety guards made out of mild steel and coloured in Standard Model and made out of SS 304 and polished to a matt OR mirror finish in GMP Model.
  • Actuated butterfly valve for easy opening of outlet discharge.
  • Limit switch for safety purpose.
  • Bigger size batch at low power consumption.

Model Volume in LTR Discharge Butterfly Valve Gear Box Motor Dimension
ACE 35 50 4" 17 0.5 HP 995 x 790 x 1077 mm
ACE 70 100 4" 22 1 HP 1150 x 1160 x 1575 mm
ACE 140 200 6" 22 1 HP 1560 x 984 x 151 mm
ACE 210 300 6" 3" 1.5 HP 1625 x 119 x 1641 mm
ACE 350 500 6" 3" 1.5 HP 1850 x 1304 x 1842 mm
ACE 525 750 8" 3 1/2" 2 HP 2000 x 1453 x 1986 mm
ACE 700 1000 8" 4" 3 HP 2230 x 1520 x 2060 mm
ACE 875 1250 10" 4" 3 HP 2380 x 1595 x 2122 mm
ACE 1050 1500 10" 5" 5 HP 2480 x 1643 x 2172 mm
ACE 1400 2000 10" 5" 5 HP 2700 x 1760 x 2290 mm
ACE 1750 2500 12" 6" 7.5 HP 2800 x 2010 x 2537 mm
ACE 2100 3000 12" 7" 10 HP 3000 x 2142 x 2671 mm
ACE 2450 3500 12" 7" 10 HP 3100 x 2289 x 2860 mm
ACE 2800 4000 12" 8" 12.5 HP 3150 x 2289 x 2819 mm
ACE 3500 5000 12" 8" 15 HP 2450 x 2436 x 2968 mm
ACE 7000 10000 16" 12" 30 HP 4430 x 2912 x 3438 mm
Request
Callback
Yes! I am Interested

Rotocone Vacuum Dryer

Rotocone Vacuum Dryer
  • Rotocone Vacuum Dryer
Get Best Quote
Approx. Price: Rs 2 Lakh / UnitGet Latest Price
Product Brochure

Product Details:

Capacity5 kg
MaterialStainless Steel
Automation GradeAutomatic
BrandACE
Power SourceElectric
Voltage240 Volt
UsageIndustrial
FinishInternal 320 grit mirror polish and outer 180 grit mat finish
Weight400 Kg
Height750 mm
Width550 mm
Length1100 mm
Main drive motor0.5 HP
Gear Box2"
Discharging size75 mm
Charging size150 mm
Discharging Ht300 mm
Charging Ht700 mm
Receiver3 Liter
Condenser0.1 m2
Cyclone Separator1 Liter
Heat transfer0.5 m2
Speed6 rpm
Working Volume9 Liter
Total Volume15 Liter

Roto Cone Vacuum Dryer is suitable for drying of materials which cannot resist high temperature, materials which are easily oxidized, volatile materials which should be retrieved, materials that are strong irritants and poisonous in nature. The Roto Cone Dryer with improved technology integrates during operation under vacuum. The Roto Cone Dryer facilitates enhanced drying efficiency, low-temperature operation, and economy of the process by total solvent recovery. It helps cGMP base working by achieving optimum dust control while offering advantages of efficient charging and discharging of materials.

The drying unit equipped with lump breakers initially breaks large lumps and subsequently powders them (in a single cone). The rotary action of the dryer together with the mechanical action of the breakers cuts down drying time and gives a lump-free product.

Advantages:
  • Reduces drying time
  • Eliminates need for re-drying of lumps
  • Handling and exposure of final product is avoided
  • Gives uniform size dry product. System can process crystalline or amorphous powders which are prone to lumps
  • Easy to clean internal surface ensures purity of product. Optimum and continuous vacuum maintenance during process
  • Uniform material shuffling over the heated contact surface of the cone.

Salient Features/ MOC (in GMP Model):
  • Inner shell V-Cone and contact parts in SS 316
  • Stearn/HW water Jacket in SS 304.
  • Insulation with the jacket in SS 304.
  • Cyclone separator in SS 316.
  • Condenser (shell tube) and Receiver in SS304
  • Butterfly valve (SS316) at discharge port with dummy and hand wheel.
  • Stand and Structure in SS 304/MS with SS304 cladding. Drive unit enclosed with SS304 Covers.
  • Dry Mechanical Seal for vacuum side.
  • Dry Mechanical Seal for Waterside.
  • FLP Motor FLP Control panel enclosed in a SS304 panel.
  • Digital Temperature Indicators (FLP) at Hot Water inlet and outlet.
  • Digital Temperature Indicator (FLP) and Dial Vacuum Gauge in vapor line.
  • Digital Temperature Controller (FLP) with Pneumatic Valve at Hot water inlet.
  • Provision for Nitrogen purgingNacuum release with interlocking to isolation valve.
  • Temperature and Vacuum Gauges (Dial Type) on Cone.
  • Safety Guard/railing telescopic type with limit switch (FLP) with interlocking.
  • Drain plug and safety valve on HW/Steam Jacket.
  • Pulse jet type dust filter is provided inside the cone.
  • Positioning wheel /inching button for the cone.

Drive
:
  • Gear Box Motor Direct Coupled and Gear Box to Cone Drive shaft Bull Gear-Pinion Gear Drive.
  • Extended shaft (drive side) so that drive unit can be kept in service zone (d required).
  • Vacuum loading system of wet material into the Cone.

Finish:
  • Internal 320 grit mirror polish and outer 180 grit mat finish.

Optional:
  • VFD for Drive Motor with RPM indicator.
  • Condenser and Receiver in SS316 instead of SS304.
  • Lump breakers with FLP motor, Mechanical seals, and electrical slip ring joint.
  • Auto Bin loading mechanism with timer control and Bins.
  • Vacuum pump with FLP motor.
  • Hot water system (steam heated) with tank and circulation pump.
Price Range:-Rs.2,00,000 - Rs.20,00,000/-
Request
Callback
Yes! I am Interested

Vibro Shifter

Vibro Shifter
  • Vibro Shifter
  • Vibro Shifter
Get Best Quote
Approx. Price: Rs 60,000 / UnitGet Latest Price

Product Details:

Usage/ApplicationIndustrial
Automation GradeSemi-Automatic
Voltage220-400 V
Material GradeSS 304 / 316 / 316L
Frequency50 Hz
PhaseSingle Phase
BrandACE
Motor SwitchFLP Push Button
DeckSingle Deck, Double Deck
Mount TypeTrolley Mounted
MaterialSS

Options:
  • Flame proof motor with FLP push button switch.
  • Magnetic arrangement for tray for heavy particles
  • Extra deck available
  • Adjustable vibration amplitude
  • GMP Models
  • Deck - single deck double deck
  • Trolley mounted Ideal for gradation and separation of dry powder/granules and semi-solids / liquids.
  • Modular design of decks with easily fitted clamps.
  • Mesh:S.S.316 moulded lead-free sieves.
Price Range:-Rs.60,000 - Rs.3,00,000/-
Request
Callback
Yes! I am Interested

Bag Lifting Hydro Extractor

Bag Lifting Hydro Extractor
  • Bag Lifting Hydro Extractor
Get Best Quote
Approx. Price: Rs 4 Lakh / UnitGet Latest Price

Product Details:

Usage/ApplicationIndustrial
BrandACE
Capacity15 Liter
Automation GradeAutomatic
Motor Power2 HP / 2 KW
Drain Size36 Inch
MaterialStainless Steel
Voltage220 V

We are the leading supplier of Bag Lifting Hydro Extractor. This offered to find application in textile as well as chemical industries.

Features:
  • Bearing housing made available with support of C.I. with SS lining provision
  • Provision of clutch pulley/fluid coupling that brings reduction on initial heavy load on motors
  • System provides for gradual acceleration with support of necessary belt drive
  • Also, comes with provision of manual top discharge facility
  • Heavy duty centrifuges with robust construction support
  • System designed to provide for rapid acceleration as well as smooth running
  • Easy quick loading/unloading operations
  • Allows for high production per batch
  • Allows for uniform distribution of slurry
Request
Callback
Yes! I am Interested
X

Explore More Product



Reach Us
M. H. Makani (Director)
Ace Industries(India) Private Limited
113, Alpine Industrial Estate, Marol Millitary Road, Marol Naka, Andheri East
Mumbai - 400059, Maharashtra, India


Call Us


Send E-mailSend SMS